Digital Twin and Its Implementation in 3D Printing: A Research Review
Downloads
The emergence of Additive Manufacturing (AM) has created a plethora of opportunities for different industries due to its application in 3D printing technology. Since its introduction back in 1980, 3D printing technology has overseen numerous developments and changes. A rarity back in the day, 3D printing has now become cheaper and available for everyone who wishes to learn and experiment with the technology. Although 3D printing technology can produce optimized and detailed printing at a cheaper rate than in earlier days, it can still be time-consuming and quite costly due to the technology's tendency to follow the trial-and-error method when printing. A proposed solution to such an issue is by implementing Digital Twin (DT), a virtual representation of an object that provides real-time reflection between the virtual and physical space and can interact and converge with the flow of data between both spaces. However, despite the need, Digital Twin is yet to achieve its fullest potential due to a gap in knowledge regarding its concept and development methods. This paper, therefore, intends to provide a brief review regarding the implementation, applications as well as challenges of DT for 3D printing, to provide an understanding of the current trends that can be utilized for further research regarding Digital Twin and its implementation in 3D printing.
Downloads
N. Shahrubudin, T. C. Lee, and R. Ramlan, “An Overview on 3D Printing Technology: Technological, Materials, and Applications,” Procedia Manufacturing, vol. 35, no. 35, pp. 1286–1296, 2019, doi: 10.1016/j.promfg.2019.06.089.
T. Peng, “Analysis of Energy Utilization in 3D Printing Processes,” Procedia CIRP, vol. 40, pp. 62–67, 2016, doi: 10.1016/j.procir.2016.01.055.
S. A. M. Tofail, E. P. Koumoulos, A. Bandyopadhyay, S. Bose, L. O’Donoghue, and C. Charitidis, “Additive manufacturing: scientific and technological challenges, market uptake and opportunities,” Materials Today, vol. 21, no. 1, pp. 22–37, Jan. 2018, doi: 10.1016/j.mattod.2017.07.001.
S. H. Huang, P. Liu, A. Mokasdar, and L. Hou, “Additive manufacturing and its societal impact: a literature review,” The International Journal of Advanced Manufacturing Technology, vol. 67, no. 5–8, pp. 1191–1203, Oct. 2012, doi: 10.1007/s00170-012-4558-5.
V. Kumar and D. Dutta, “An assessment of data formats for layered manufacturing,” Advances in Engineering Software, vol. 28, no. 3, pp. 151–164, Apr. 1997, doi: 10.1016/s0965-9978(96)00050-6.
T. Rayna and L. Striukova, “From rapid prototyping to home fabrication: How 3D printing is changing business model innovation,” Technological Forecasting and Social Change, vol. 102, pp. 214–224, Jan. 2016, doi: 10.1016/j.techfore.2015.07.023.
V. Gokhare, D. N. Raut, and D. K. Shinde, “A Review paper on 3D-Printing Aspects and Various Processes Used in the 3D-Printing,” International Journal of Engineering Research & Technology, vol.6, no. 06, Jun. 2017.
A. Kantaros, N. Laskaris, D. Piromalis, and T. Gkanetsos, “Manufacturing Zero-Waste COVID-19 Personal Protection Equipment: a Case Study of Utilizing 3D Printing While Employing Waste Material Recycling,” Circular Economy and Sustainability, vol. 1, Apr. 2021, doi: 10.1007/s43615-021-00047-8.
K.-D. Thoben, S. Wiesner, and T. Wuest, “‘Industrie 4.0’ and Smart Manufacturing – A Review of Research Issues and Application Examples,” International Journal of Automation Technology, vol. 11, no. 1, pp. 4–16, Jan. 2017, doi: 10.20965/ijat.2017.p0004.
B. Wang, F. Tao, X. Fang, C. Liu, and T. Freiheit, “Smart Manufacturing and Intelligent Manufacturing: A Comparative Review,” Engineering, vol. 7, no. 6, Jun. 2021, doi: https://doi.org/10.1016/j.eng.2020.07.017.
Q. Qi, F. Tao, Y. Zuo, and D. Zhao, “Digital Twin Service towards Smart Manufacturing,” Procedia CIRP, vol. 72, pp. 237–242, 2018, doi: 10.1016/j.procir.2018.03.103.
A. Fuller, Z. Fan, C. Day, and C. Barlow, “Digital Twin: Enabling Technologies, Challenges and Open Research,” IEEE Access, vol. 8, pp. 108952–108971, 2020, doi: 10.1109/access.2020.2998358.
D. Jones, C. Snider, A. Nassehi, J. Yon, and B. Hicks, “Characterising the Digital Twin: A systematic literature review,” CIRP Journal of Manufacturing Science and Technology, vol. 29, pp. 36–52, May 2020, doi: 10.1016/j.cirpj.2020.02.002.
A. Kantaros, D. Piromalis, G. Tsaramirsis, P. Papageorgas, and H. Tamimi, “3D Printing and Implementation of Digital Twins: Current Trends and Limitations,” Applied System Innovation, vol. 5, no. 1, p. 7, Dec. 2021, doi: 10.3390/asi5010007.
L. Zhang et al., “Digital Twins for Additive Manufacturing: A State-of-the-Art Review,” Applied Sciences, vol. 10, no. 23, p. 8350, Nov. 2020, doi: 10.3390/app10238350.
A. Gaikwad, R. Yavari, M. Montazeri, K. Cole, L. Bian, and P. Rao, “Toward the digital twin of additive manufacturing: Integrating thermal simulations, sensing, and analytics to detect process faults,” IISE Transactions, vol. 52, no. 11, pp. 1204–1217, Jan. 2020, doi: 10.1080/24725854.2019.1701753.
A. K. Ghosh, A. S. Ullah, R. Teti, and A. Kubo, “Developing sensor signal-based digital twins for intelligent machine tools,” Journal of Industrial Information Integration, vol. 24, p. 100242, Dec. 2021, doi: 10.1016/j.jii.2021.100242.
M. Perno, L. Hvam, and A. Haug, “Implementation of digital twins in the process industry: A systematic literature review of enablers and barriers,” Computers in Industry, vol. 134, p. 103558, Jan. 2022, doi: 10.1016/j.compind.2021.103558.
Y. Dong, R. Tan, P. Zhang, Q. Peng, and P. Shao, “Product redesign using functional backtrack with digital twin,” Advanced Engineering Informatics, vol. 49, p. 101361, Aug. 2021, doi: 10.1016/j.aei.2021.101361.
A. Rasheed, O. San, and T. Kvamsdal, “Digital Twin: Values, Challenges and Enablers From a Modeling Perspective,” IEEE Access, vol. 8, pp. 21980–22012, 2020, doi: 10.1109/access.2020.2970143.
X. Chen, E. Kang, S. Shiraishi, V. M. Preciado, and Z. Jiang, “Digital Behavioral Twins for Safe Connected Cars,” Proceedings of the 21th ACM/IEEE International Conference on Model Driven Engineering Languages and Systems, Oct. 2018, doi: 10.1145/3239372.3239401.
H. Pargmann, D. Euhausen, and R. Faber, “Intelligent big data processing for wind farm monitoring and analysis based on cloud-technologies and digital twins: A quantitative approach,” 2018 IEEE 3rd International Conference on Cloud Computing and Big Data Analysis (ICCCBDA), pp. 233–237, Apr. 2018, doi: 10.1109/icccbda.2018.8386518.
S.-K. Jo, D.-H. Park, H. Park, and S.-H. Kim, “Smart Livestock Farms Using Digital Twin: Feasibility Study,” 2018 International Conference on Information and Communication Technology Convergence (ICTC), Oct. 2018, doi: 10.1109/ictc.2018.8539516.
D. Ross, “Digital twinning [virtual reality avatars],” Engineering & Technology, vol. 11, no. 4, pp. 44–45, May 2016, doi: 10.1049/et.2016.0403.
H. Laaki, Y. Miche, and K. Tammi, “Prototyping a Digital Twin for Real Time Remote Control Over Mobile Networks: Application of Remote Surgery,” IEEE Access, vol. 7, pp. 20325–20336, 2019, doi: 10.1109/access.2019.2897018.
Y. Xu, Y. Sun, X. Liu, and Y. Zheng, “A Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning,” IEEE Access, vol. 7, pp. 19990–19999, 2019, doi: 10.1109/access.2018.2890566.
C. Mandolla, A. M. Petruzzelli, G. Percoco, and A. Urbinati, “Building a digital twin for additive manufacturing through the exploitation of blockchain: A case analysis of the aircraft industry,” Computers in Industry, vol. 109, pp. 134–152, Aug. 2019, doi: 10.1016/j.compind.2019.04.011.
F. Longo, L. Nicoletti, and A. Padovano, “Ubiquitous knowledge empowers the Smart Factory: The impacts of a Service-oriented Digital Twin on enterprises’ performance,” Annual Reviews in Control, vol. 47, pp. 221–236, 2019, doi: 10.1016/j.arcontrol.2019.01.001.
M. Lohtander, N. Ahonen, M. Lanz, J. Ratava, and J. Kaakkunen, “Micro Manufacturing Unit and the Corresponding 3D-Model for the Digital Twin,” Procedia Manufacturing, vol. 25, pp. 55–61, 2018, doi: 10.1016/j.promfg.2018.06.057.
D.-G. J. Opoku, S. Perera, R. Osei-Kyei, and M. Rashidi, “Digital twin application in the construction industry: A literature review,” Journal of Building Engineering, vol. 40, p. 102726, Aug. 2021, doi: 10.1016/j.jobe.2021.102726.
A. Ghaffarianhoseini et al., “Building Information Modelling (BIM) uptake: Clear benefits, understanding its implementation, risks and challenges,” Renewable and Sustainable Energy Reviews, vol. 75, pp. 1046–1053, Aug. 2017, doi: 10.1016/j.rser.2016.11.083.
C. Mawere, T. P. Mpofu, and M. Mukosera, “The Impact and Application of 3D Printing Technology,” International Journal of Science and Research, vol. 3, no. 6, pp. 2148–2152, Jun. 2014.
Z. Chen, “Research on the Impact of 3D Printing on the International Supply Chain,” Advances in Materials Science and Engineering, vol. 2016, pp. 1–16, 2016, doi: 10.1155/2016/4173873.
Mr. A. A. Shinde, Mr. R. D. Patil, Mr. A. R. Dandekar, and DR. N. M. Dhawale, “3D Printing Technology, Material Used For Printing and its Applications,” International Journal of Scientific and Research, vol. 11, no. 7, pp. 105–108, Jul. 2020.
L. Liu, Y. Meng, X. Dai, K. Chen, and Y. Zhu, “3D Printing Complex Egg White Protein Objects: Properties and Optimization,” Food and Bioprocess Technology, vol. 12, no. 2, pp. 267–279, Nov. 2018, doi: 10.1007/s11947-018-2209-z.
D. Fan et al., “Progressive 3D Printing Technology and Its Application in Medical Materials,” Frontiers in Pharmacology, vol. 11, Mar. 2020, doi: 10.3389/fphar.2020.00122.
D. Mourtzis, T. Togias, J. Angelopoulos, and P. Stavropoulos, “A Digital Twin architecture for monitoring and optimization of Fused Deposition Modeling processes,” Procedia CIRP, vol. 103, pp. 97–102, 2021, doi: 10.1016/j.procir.2021.10.015.
L. Yi, M. Glatt, S. Ehmsen, W. Duan, and J. C. Aurich, “Process monitoring of economic and environmental performance of a material extrusion printer using an augmented reality-based digital twin,” Additive Manufacturing, vol. 48, no. Part A, p. 102388, Oct. 2021, doi: 10.1016/j.addma.2021.102388.
F. Corradini and M. Silvestri, “Design and testing of a digital twin for monitoring and quality assessment of material extrusion process,” Additive Manufacturing, vol. 51, p. 102633, Jan. 2022, doi: 10.1016/j.addma.2022.102633.
C. S. Paripooranan, R. Abishek, D. C. Vivek, and S. Karthik, “An Implementation of AR Enabled Digital Twins for 3-D Printing,” 2020 IEEE International Symposium on Smart Electronic Systems (iSES) (Formerly iNiS), Dec. 2020, doi: 10.1109/ises50453.2020.00043.
C. A. Odada, J. B. Byiringiro, and F. M. Madaraka, “Development of Data-Driven Digital Twin for Real-Time Monitoring of FDM 3D Printer,” Journal of Mechanical Engineering and Automation, vol. 10, no. 2, pp. 25–35, 2021, Accessed: Jun. 12, 2022. [Online]. Available: http://article.sapub.org/10.5923.j.jmea.20211002.01.html
E. C. Balta, D. M. Tilbury, and K. Barton, “A Digital Twin Framework for Performance Monitoring and Anomaly Detection in Fused Deposition Modeling,” 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE), Aug. 2019, doi: 10.1109/coase.2019.8843166.
Y. Lai, Y. Wang, R. Ireland, and A. Liu, “Digital twin driven virtual verification,” Digital Twin Driven Smart Design, pp. 109–138, 2020, doi: 10.1016/b978-0-12-818918-4.00004-x.
F. Tao et al., “Digital twin-driven product design framework,” International Journal of Production Research, vol. 57, no. 12, pp. 3935–3953, Feb. 2018, doi: 10.1080/00207543.2018.1443229.
P. Stavropoulos, A. Papacharalampoloulos, and K. Tzimanis, “Design and Implementation of a Digital Twin Platform for AM processes,” Procedia CIRP, vol. 104, pp. 1722–1727, 2021, doi: 10.1016/j.procir.2021.11.290.
I. Gibson, D. W. Rosen, and B. Stucker, “Development of Additive Manufacturing Technology,” Additive Manufacturing Technologies, pp. 36–58, 2010, doi: 10.1007/978-1-4419-1120-9_2.
G. L. Knapp et al., “Building blocks for a digital twin of additive manufacturing,” Acta Materialia, vol. 135, pp. 390–399, Aug. 2017, doi: 10.1016/j.actamat.2017.06.039.
T. Mukherjee, V. Manvatkar, A. De, and T. DebRoy, “Dimensionless numbers in additive manufacturing,” Journal of Applied Physics, vol. 121, no. 6, p. 064904, Feb. 2017, doi: 10.1063/1.4976006.
M. Moretti, A. Rossi, and N. Senin, “In-process monitoring of part geometry in fused filament fabrication using computer vision and digital twins,” Additive Manufacturing, vol. 37, Jan. 2021, doi: 10.1016/j.addma.2020.101609.
I. Sieber, R. Thelen, and U. Gengenbach, “Enhancement of High-Resolution 3D Inkjet-Printing of Optical Freeform Surfaces Using Digital Twins,” Micromachines, vol. 12, no. 1, p. 35, Dec. 2020, doi: 10.3390/mi12010035.
A. Gidwani, H. Vasilyan, R. A. Susantyoko, and M. Alyammahi, “Digital Twin Additive Reconstruction Tool for Micromechanical Modeling of 3D-Printed Parts,” Volume 2A: Advanced Manufacturing, Nov. 2021, doi: 10.1115/imece2021-69234.
S. Weinand and P. Rosenberger, “Digital-Twin-Software Areas of Application, Chances and Challenges,” 2021 IEEE 21st International Symposium on Computational Intelligence and Informatics (CINTI), Nov. 2021, doi: 10.1109/cinti53070.2021.9668609.
T. Mukherjee and T. DebRoy, “A digital twin for rapid qualification of 3D printed metallic components,” Applied Materials Today, vol. 14, pp. 59–65, Mar. 2019, doi: 10.1016/j.apmt.2018.11.003.
M. Machado, E. Oliveira, L. Silva, J. Silva, and J. Sousa, “Development of a Digital Twin for Additive Manufacturing,” Volume 2B: Advanced Manufacturing, Nov. 2021, doi: 10.1115/imece2021-68002.
S. Rokka Chhetri and M. A. Al Faruque, “IoT-Enabled Living Digital Twin Modeling,” Data-Driven Modeling of Cyber-Physical Systems using Side-Channel Analysis, pp. 155–182, Feb. 2020, doi: 10.1007/978-3-030-37962-9_8.
L. Guo, Y. Cheng, Y. Zhang, Y. Liu, C. Wan, and J. Liang, “Development of Cloud-Edge Collaborative Digital Twin System for FDM Additive Manufacturing,” 2021 IEEE 19th International Conference on Industrial Informatics (INDIN), pp. 1–6, Jul. 2021, doi: 10.1109/indin45523.2021.9557492.
W. Yu et al., “A Survey on the Edge Computing for the Internet of Things,” IEEE Access, vol. 6, pp. 6900–6919, 2018, doi: 10.1109/access.2017.2778504.
M. Pantelidakis, K. Mykoniatis, J. Liu, and G. Harris, “A digital twin ecosystem for additive manufacturing using a real-time development platform,” The International Journal of Advanced Manufacturing Technology, vol. 120, no. 9–10, pp. 6547–6563, Apr. 2022, doi: 10.1007/s00170-022-09164-6.
E. Prianto, H. Sigit Pramono, and Yuchofif, “IoT-Based 3D Printer Development for Student Competence Improvement,” Journal of Physics: Conference Series, vol. 2111, no. 1, p. 012002, Nov. 2021, doi: 10.1088/1742-6596/2111/1/012002.
A. L. Luque, J. M. Jurado, J. L. Cárdenas, and F. R. Feito, “Advances for 3D printing: Remote control system and multi-material solutions,” CSRN, 2018, doi: 10.24132/csrn.2018.2802.20.
C. M. Henson, N. I. Decker, and Q. Huang, “A digital twin strategy for major failure detection in fused deposition modeling processes,” Procedia Manufacturing, vol. 53, pp. 359–367, 2021, doi: 10.1016/j.promfg.2021.06.039.
R. Jafari-Marandi, M. Khanzadeh, W. Tian, B. Smith, and L. Bian, “From in-situ monitoring toward high-throughput process control: cost-driven decision-making framework for laser-based additive manufacturing,” Journal of Manufacturing Systems, vol. 51, pp. 29–41, Apr. 2019, doi: 10.1016/j.jmsy.2019.02.005.
T. DebRoy, W. Zhang, J. Turner, and S. S. Babu, “Building digital twins of 3D printing machines,” Scripta Materialia, vol. 135, pp. 119–124, Jul. 2017, doi: 10.1016/j.scriptamat.2016.12.005.
S. Singh, E. Shehab, N. Higgins, K. Fowler, T. Tomiyama, and C. Fowler, “Challenges of Digital Twin in High Value Manufacturing,” SAE Technical Paper Series, Oct. 2018, doi: 10.4271/2018-01-1928.
K. Naito, “A Survey on the Internet-of-Things: Standards, Challenges and Future Prospects,” Journal of Information Processing, vol. 25, no. 0, pp. 23–31, 2017, doi: 10.2197/ipsjjip.25.23.
Q. Qi and F. Tao, “Digital Twin and Big Data Towards Smart Manufacturing and Industry 4.0: 360 Degree Comparison,” IEEE Access, vol. 6, pp. 3585–3593, Jan. 2018, doi: 10.1109/access.2018.2793265.
X. Zhang and W. Zhu, “Application framework of digital twin-driven product smart manufacturing system : A case study of aeroengine blade manufacturing,” SAGE journals, vol. 16, no. 5, Oct. 16, 2019. https://doi.org/10.1177%2F1729881419880663
[68]F. Tao, J. Cheng, Q. Qi, M. Zhang, H. Zhang, and F. Sui, “Digital twin-driven product design, manufacturing and service with big data,” The International Journal of Advanced Manufacturing Technology, vol. 94, no. 9–12, pp. 3563–3576, Mar. 2017, doi: 10.1007/s00170-017-0233-1.
[69]D. M. Botín-Sanabria, A.-S. Mihaita, R. E. Peimbert-García, M. A. Ramírez-Moreno, R. A. Ramírez-Mendoza, and J. de J. Lozoya-Santos, “Digital Twin Technology Challenges and Applications: A Comprehensive Review,” Remote Sensing, vol. 14, no. 6, p. 1335, Mar. 2022, doi: 10.3390/rs14061335.
[70]C. Nwogu, G. Lugaresi, A. Anagnostou, A. Matta, and S. J. E. Taylor, “Towards a Requirement-driven Digital Twin Architecture,” Procedia CIRP, vol. 107, pp. 758–763, 2022, doi: 10.1016/j.procir.2022.05.058.
[71]R. Wagner, B. Schleich, B. Haefner, A. Kuhnle, S. Wartzack, and G. Lanza, “Challenges and Potentials of Digital Twins and Industry 4.0 in Product Design and Production for High Performance Products,” Procedia CIRP, vol. 84, pp. 88–93, 2019, doi: 10.1016/j.procir.2019.04.219.
[72]M. Bevilacqua et al., “Digital Twin Reference Model Development to Prevent Operators’ Risk in Process Plants,” Sustainability, vol. 12, no. 3, p. 1088, Feb. 2020, doi: 10.3390/su12031088.
Copyright (c) 2022 International Journal of Scientific Research and Management
This work is licensed under a Creative Commons Attribution 4.0 International License.